How to wear adult diapers correctly
Method one
1. Let the user lie on his side, lay the adult diaper flat on the bed, the part with adhesive buckle is the back piece, and open the adhesive buckle on the far side from the user.
2, turn the user to lie flat, open the other side of the adult diaper adhesive buckle, and adjust the left and right position, so that the diaper is located directly below the user's body.
3. Put the front piece of the adult diaper between the legs and attach it to the abdomen. Adjust the upper and lower positions properly, so that the diaper completely fits the body, and the back end is aligned, and ensure that the legs and the diaper are snug.
4. Glue the buckle to the front waist patch area, adjust the adhesive position appropriately, and again ensure that the diaper fully fits the body. It is best to adjust the three-dimensional leak protection.
Method 2
1. Spread out the diaper and fold it in half to loosen it so that the diaper becomes a groove arc.
2. Turn the patient into a side-lying position, pull out the used diaper, and put the new diaper through the crotch.
3. Align the back piece with the spine, align the front piece with the navel, and adjust to the front and back height.
4. Arrange and spread out the back of the diaper, cover the buttocks, and then flip back to the flat position.
5, arrange and spread the front piece, please pay attention to keep the groove arc in the middle of the diaper, do not deliberately flat.
6. First fix the tape at the bottom of both sides and pull it upward slightly; Then apply the top tape, slightly oblique downward pull.